CYS BLS5107 Brushless Motor 7kg Metal Gear Digital Servo

CYS-BLS5107 Brushless Motor 7kg Digital Servo
Brand: CYS MODEL
Item No.: CYS-BLS5107

Digital Servo + Brushless Motor + Metal Gear
Size: 40.3*20.3*39.2mm
Control System: (+)Pulse Width Control 1500usec Neutral
Weight: 64g
Wire Length: 30cm
Voltage: 6.0-7.4V
Operating Temperature Range: -10 to +50 Celcius degree
Operating Speed at no load:
0.06sec/60 degree (6.0V)
0.05sec/60 degree (7.4V)
Stall Torque:
5.5kg.cm (76.40 oz/in) (6.0V)
7.0kg.cm (97.23 oz/in) (7.4V)

Operating Angle: 45deg.one side pulse traveling 500 usec
360 Modifiable: No
Direction: Anticlockwise/Pulse Traveling 1000~2000usec
Current Drain (6.0V): 4mA/idle and 100mA no load operating
Current Drain (7.4V): 5mA/idle and 120mA no load operating
Stall Current: 2.7A/3.2A
Dead Band Width: 2usec
Motor Type: Brushless Motor
Bearing Type: Dual Ball Bearing
Horn gear spline: 25T
Gear Type: Titanium
Connector Wire Length: 300mm
Wire info:
Brown/Black = Negative
Red = Positive
Orange/White = Signal

Important Notes:
01. JR connector.
02. Refer to the figure when installing the servo accessories.
03. For engine powered airplanes and boats, rubber must be used to reduce vibration.
04. Please choose correct model for your application.
05. Torque over-loaded will damage the servo's mechanism.
06. Keep the servo clean and away from dust, corrosive gas and humid air.