TomBee 150 Racing FPV Drone RTF Gavin 6A

TomBee 150 Racing FPV Drone RTF with GAVIN-6A
Item No.: DY8891R-6A

TomBee 150 is a 150-sized racing quad, which mainly consists of integrated power and control system and carbon fiber airframe. It is a small and fast racer with high integrated design. Integrated with Detrum RXC6 reciever, OSD module, 5.8G video transmission and flight controller. Equipped with 800TVL 3-megapixel mini camera and searchligth, can provide users with perfect FPV visual experience. TomBee 150 also supports the third-party receiver which can meet users' need fully.

FEATURES:
01. Highly integrated design, hand launch to fly.
02. Anti-impact protective structure design.
03. Small size with strong power.
04. High definition camera.
05. Built-in Detrum receiver, and support third-party receiver.
06. Integrated 5.8G video transmitter.
07. Lost model alarm.
08. Multiple flight modes, one key toggle.

Specification:
Flight Controller: Detrum F3 flight controller w/Integrated OSD.
5.8G Transmitter: DVT58 25mW/200mW
Motor: TOMCAT 1806-KV3100 brushless motor
Esc: TomBee 150 25A brushless speed control
Recommended Battery: 3S/4S 500-850mAh LiPO
Propeller: 3x3
Compatible Receiver: Spektrum, S.Bus, XBus, SumD, SumH, PPM, PWM
Firmware: Cleanflight-configurator 1.2.4 or earlier and Betaflight-configurator
Flight Time: (about)7 minutes
Work Temperature: -10~40 Celsius degree
Weight: 210g (no battery)

Flight Camera:
Lens: 3MP, 2.5mm
Angle: 20-40 degree
Horizontal Resolution: 800TVL
Video Standard: PAL/NTSC
Sensor: CMOS
Power Input: 3.5-6V

RC Transmitter:
Model: GAVIN-6A
Radio Frequency: 2.4Ghz
Output Power: 100mW
Power Supply: 4x 1.5V AA battery (Not included)
Output Pulse: 1000ms-2000ms (neutral 1500ms)

DVT58 Transmitter
Work Frequency: 5.8GHz ISM
Output Power: 25mW/200mW
Channel: 48CH
Antenna Connector: 50Ω SMA
Video Bandwidth: 8MHz
Video Format: NTSC/PAL